From: Antonio Nino Diaz Date: Tue, 15 May 2018 12:12:50 +0000 (+0100) Subject: Revert "plat/arm: Migrate AArch64 port to the multi console driver" X-Git-Url: http://git.openwrt.org/%22https:/collectd.org//%22/%22https:/collectd.org/%22?a=commitdiff_plain;h=bf4698fdef67d867a402488df86724b807372e61;p=project%2Fbcm63xx%2Fatf.git Revert "plat/arm: Migrate AArch64 port to the multi console driver" This reverts commit 2f18aa1fa35305f8feec25867473d30975b242fe. It is causing some tests to fail. Until the cause is found and fixed, it is needed to remove this commit from master. Change-Id: Ic5ff7a841903a15613e00379e87cbbd8a0e85152 Signed-off-by: Antonio Nino Diaz --- diff --git a/include/drivers/console.h b/include/drivers/console.h index 422492a7..0855170e 100644 --- a/include/drivers/console.h +++ b/include/drivers/console.h @@ -16,9 +16,9 @@ #define CONSOLE_T_FLUSH (U(4) * REGSZ) #define CONSOLE_T_DRVDATA (U(5) * REGSZ) -#define CONSOLE_FLAG_BOOT (U(1) << 0) -#define CONSOLE_FLAG_RUNTIME (U(1) << 1) -#define CONSOLE_FLAG_CRASH (U(1) << 2) +#define CONSOLE_FLAG_BOOT BIT(0) +#define CONSOLE_FLAG_RUNTIME BIT(1) +#define CONSOLE_FLAG_CRASH BIT(2) /* Bits 3 to 7 reserved for additional scopes in future expansion. */ #define CONSOLE_FLAG_SCOPE_MASK ((U(1) << 8) - 1) /* Bits 8 to 31 reserved for non-scope use in future expansion. */ diff --git a/include/plat/arm/board/common/board_arm_def.h b/include/plat/arm/board/common/board_arm_def.h index cfd29224..845f1403 100644 --- a/include/plat/arm/board/common/board_arm_def.h +++ b/include/plat/arm/board/common/board_arm_def.h @@ -94,11 +94,7 @@ * PLAT_ARM_MAX_BL31_SIZE is calculated using the current BL31 debug size plus a * little space for growth. */ -#if ENABLE_SPM -# define PLAT_ARM_MAX_BL31_SIZE 0x21000 -#else -# define PLAT_ARM_MAX_BL31_SIZE 0x20000 -#endif +#define PLAT_ARM_MAX_BL31_SIZE 0x20000 #ifdef AARCH32 /* diff --git a/include/plat/arm/common/plat_arm.h b/include/plat/arm/common/plat_arm.h index 95b2a5a3..612a63a8 100644 --- a/include/plat/arm/common/plat_arm.h +++ b/include/plat/arm/common/plat_arm.h @@ -153,12 +153,6 @@ struct tzc_dmc500_driver_data; void arm_tzc_dmc500_setup(struct tzc_dmc500_driver_data *plat_driver_data, const arm_tzc_regions_info_t *tzc_regions); -/* Console utility functions */ -void arm_console_boot_init(void); -void arm_console_boot_end(void); -void arm_console_runtime_init(void); -void arm_console_runtime_end(void); - /* Systimer utility function */ void arm_configure_sys_timer(void); diff --git a/plat/arm/common/aarch64/arm_helpers.S b/plat/arm/common/aarch64/arm_helpers.S index 752929db..760a53af 100644 --- a/plat/arm/common/aarch64/arm_helpers.S +++ b/plat/arm/common/aarch64/arm_helpers.S @@ -8,9 +8,9 @@ .weak plat_arm_calc_core_pos .weak plat_my_core_pos - .weak plat_crash_console_init - .weak plat_crash_console_putc - .weak plat_crash_console_flush + .globl plat_crash_console_init + .globl plat_crash_console_putc + .globl plat_crash_console_flush .globl platform_mem_init @@ -50,7 +50,7 @@ func plat_crash_console_init mov_imm x0, PLAT_ARM_CRASH_UART_BASE mov_imm x1, PLAT_ARM_CRASH_UART_CLK_IN_HZ mov_imm x2, ARM_CONSOLE_BAUDRATE - b console_pl011_core_init + b console_core_init endfunc plat_crash_console_init /* --------------------------------------------- @@ -62,7 +62,7 @@ endfunc plat_crash_console_init */ func plat_crash_console_putc mov_imm x1, PLAT_ARM_CRASH_UART_BASE - b console_pl011_core_putc + b console_core_putc endfunc plat_crash_console_putc /* --------------------------------------------- @@ -75,7 +75,7 @@ endfunc plat_crash_console_putc */ func plat_crash_console_flush mov_imm x0, PLAT_ARM_CRASH_UART_BASE - b console_pl011_core_flush + b console_core_flush endfunc plat_crash_console_flush /* --------------------------------------------------------------------- diff --git a/plat/arm/common/arm_bl1_setup.c b/plat/arm/common/arm_bl1_setup.c index e5e73041..379e87df 100644 --- a/plat/arm/common/arm_bl1_setup.c +++ b/plat/arm/common/arm_bl1_setup.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -44,7 +45,8 @@ void arm_bl1_early_platform_setup(void) #endif /* Initialize the console to provide early debug support */ - arm_console_boot_init(); + console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); /* Allow BL1 to see the whole Trusted RAM */ bl1_tzram_layout.total_base = ARM_BL_RAM_BASE; diff --git a/plat/arm/common/arm_bl2_el3_setup.c b/plat/arm/common/arm_bl2_el3_setup.c index e7247c63..e70d115e 100644 --- a/plat/arm/common/arm_bl2_el3_setup.c +++ b/plat/arm/common/arm_bl2_el3_setup.c @@ -1,8 +1,9 @@ /* - * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ +#include #include #include #include @@ -20,7 +21,8 @@ static meminfo_t bl2_el3_tzram_layout; void arm_bl2_el3_early_platform_setup(void) { /* Initialize the console to provide early debug support */ - arm_console_boot_init(); + console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); /* * Allow BL2 to see the whole Trusted RAM. This is determined diff --git a/plat/arm/common/arm_bl2_setup.c b/plat/arm/common/arm_bl2_setup.c index 753da65a..dc7cd680 100644 --- a/plat/arm/common/arm_bl2_setup.c +++ b/plat/arm/common/arm_bl2_setup.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -183,7 +184,8 @@ struct entry_point_info *bl2_plat_get_bl31_ep_info(void) void arm_bl2_early_platform_setup(uintptr_t tb_fw_config, meminfo_t *mem_layout) { /* Initialize the console to provide early debug support */ - arm_console_boot_init(); + console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); /* Setup the BL2 memory layout */ bl2_tzram_layout = *mem_layout; diff --git a/plat/arm/common/arm_bl2u_setup.c b/plat/arm/common/arm_bl2u_setup.c index cd691e5c..3b8e4aa4 100644 --- a/plat/arm/common/arm_bl2u_setup.c +++ b/plat/arm/common/arm_bl2u_setup.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -35,8 +36,8 @@ void bl2u_platform_setup(void) void arm_bl2u_early_platform_setup(meminfo_t *mem_layout, void *plat_info) { /* Initialize the console to provide early debug support */ - arm_console_boot_init(); - + console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); generic_delay_timer_init(); } diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c index 4a727145..3c70f9de 100644 --- a/plat/arm/common/arm_bl31_setup.c +++ b/plat/arm/common/arm_bl31_setup.c @@ -72,7 +72,8 @@ void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_con #endif { /* Initialize the console to provide early debug support */ - arm_console_boot_init(); + console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); #if RESET_TO_BL31 /* There are no parameters from BL2 if BL31 is a reset vector */ @@ -225,18 +226,12 @@ void arm_bl31_platform_setup(void) /******************************************************************************* * Perform any BL31 platform runtime setup prior to BL31 exit common to ARM * standard platforms - * Perform BL31 platform setup ******************************************************************************/ void arm_bl31_plat_runtime_setup(void) { -#if MULTI_CONSOLE_API - console_switch_state(CONSOLE_FLAG_RUNTIME); -#else - console_uninit(); -#endif - /* Initialize the runtime console */ - arm_console_runtime_init(); + console_init(PLAT_ARM_BL31_RUN_UART_BASE, PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); } void bl31_platform_setup(void) diff --git a/plat/arm/common/arm_common.mk b/plat/arm/common/arm_common.mk index b1aa4280..015e454a 100644 --- a/plat/arm/common/arm_common.mk +++ b/plat/arm/common/arm_common.mk @@ -104,11 +104,6 @@ SEPARATE_CODE_AND_RODATA := 1 # Enable new version of image loading on ARM platforms LOAD_IMAGE_V2 := 1 -# Use the multi console API, which is only available for AArch64 for now -ifeq (${ARCH}, aarch64) - MULTI_CONSOLE_API := 1 -endif - # Use generic OID definition (tbbr_oid.h) USE_TBBR_DEFS := 1 @@ -125,8 +120,7 @@ PLAT_INCLUDES += -Iinclude/plat/arm/common/aarch64 endif PLAT_BL_COMMON_SOURCES += plat/arm/common/${ARCH}/arm_helpers.S \ - plat/arm/common/arm_common.c \ - plat/arm/common/arm_console.c + plat/arm/common/arm_common.c ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1) PLAT_BL_COMMON_SOURCES += lib/xlat_tables/xlat_tables_common.c \ diff --git a/plat/arm/common/arm_console.c b/plat/arm/common/arm_console.c deleted file mode 100644 index 20b8f87e..00000000 --- a/plat/arm/common/arm_console.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#include -#include -#include -#include -#include -#include - -/******************************************************************************* - * Functions that set up the console - ******************************************************************************/ -#if MULTI_CONSOLE_API -static console_pl011_t arm_boot_console; -static console_pl011_t arm_runtime_console; -#endif - -/* Initialize the console to provide early debug support */ -void arm_console_boot_init(void) -{ -#if MULTI_CONSOLE_API - int rc = console_pl011_register(PLAT_ARM_BOOT_UART_BASE, - PLAT_ARM_BOOT_UART_CLK_IN_HZ, - ARM_CONSOLE_BAUDRATE, - &arm_boot_console); - if (rc == 0) { - /* - * The crash console doesn't use the multi console API, it uses - * the core console functions directly. It is safe to call panic - * and let it print debug information. - */ - panic(); - } - - console_set_scope(&arm_boot_console.console, CONSOLE_FLAG_BOOT); -#else - (void)console_init(PLAT_ARM_BOOT_UART_BASE, - PLAT_ARM_BOOT_UART_CLK_IN_HZ, - ARM_CONSOLE_BAUDRATE); -#endif /* MULTI_CONSOLE_API */ -} - -void arm_console_boot_end(void) -{ -#if MULTI_CONSOLE_API - (void)console_flush(); - - (void)console_unregister(&arm_boot_console.console); -#else - console_uninit(); -#endif /* MULTI_CONSOLE_API */ -} - -/* Initialize the runtime console */ -void arm_console_runtime_init(void) -{ -#if MULTI_CONSOLE_API - int rc = console_pl011_register(PLAT_ARM_BL31_RUN_UART_BASE, - PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ, - ARM_CONSOLE_BAUDRATE, - &arm_runtime_console); - if (rc == 0) - panic(); - - console_set_scope(&arm_runtime_console.console, CONSOLE_FLAG_RUNTIME); -#else - (void)console_init(PLAT_ARM_BL31_RUN_UART_BASE, - PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ, - ARM_CONSOLE_BAUDRATE); -#endif /* MULTI_CONSOLE_API */ -} - -void arm_console_runtime_end(void) -{ -#if MULTI_CONSOLE_API - (void)console_flush(); - - (void)console_unregister(&arm_runtime_console.console); -#else - console_uninit(); -#endif /* MULTI_CONSOLE_API */ -} diff --git a/plat/arm/common/arm_pm.c b/plat/arm/common/arm_pm.c index 4632099e..44ac5b5d 100644 --- a/plat/arm/common/arm_pm.c +++ b/plat/arm/common/arm_pm.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -158,12 +159,6 @@ void arm_system_pwr_domain_save(void) plat_arm_gic_save(); - /* - * Unregister console now so that it is not registered for a second - * time during resume. - */ - arm_console_runtime_end(); - /* * All the other peripheral which are configured by ARM TF are * re-initialized on resume from system suspend. Hence we @@ -179,8 +174,8 @@ void arm_system_pwr_domain_save(void) *****************************************************************************/ void arm_system_pwr_domain_resume(void) { - /* Initialize the console */ - arm_console_runtime_init(); + console_init(PLAT_ARM_BL31_RUN_UART_BASE, PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ, + ARM_CONSOLE_BAUDRATE); /* Assert system power domain is available on the platform */ assert(PLAT_MAX_PWR_LVL >= ARM_PWR_LVL2); diff --git a/plat/arm/common/tsp/arm_tsp_setup.c b/plat/arm/common/tsp/arm_tsp_setup.c index 16125ad4..abeaea0b 100644 --- a/plat/arm/common/tsp/arm_tsp_setup.c +++ b/plat/arm/common/tsp/arm_tsp_setup.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,8 +7,6 @@ #include #include #include -#include -#include #include #include #include @@ -24,30 +22,14 @@ /******************************************************************************* * Initialize the UART ******************************************************************************/ -#if MULTI_CONSOLE_API -static console_pl011_t arm_tsp_runtime_console; -#endif - void arm_tsp_early_platform_setup(void) { -#if MULTI_CONSOLE_API /* * Initialize a different console than already in use to display * messages from TSP */ - int rc = console_pl011_register(PLAT_ARM_TSP_UART_BASE, - PLAT_ARM_TSP_UART_CLK_IN_HZ, - ARM_CONSOLE_BAUDRATE, - &arm_tsp_runtime_console); - if (rc == 0) - panic(); - - console_set_scope(&arm_tsp_runtime_console.console, - CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME); -#else console_init(PLAT_ARM_TSP_UART_BASE, PLAT_ARM_TSP_UART_CLK_IN_HZ, ARM_CONSOLE_BAUDRATE); -#endif /* MULTI_CONSOLE_API */ } void tsp_early_platform_setup(void)